Xdsl splitter/filter can eliminate the interference between data signal and voice signal transmitted in the same telephone line and make the internet and telephone go both at the same time(Data signal for internet   voice signal for telephone) The structure of Adsl splitter/filter: One RJ11 at one end for line. Two RJ11 at the other end for phone and modem. MDF Splitter can make data signal from ATU-C and voice signal from PSTN transmitted in the same telephone line The structure of ADSL Splitter/filter: ADSL port for ATU-C,Ports port for PSTN,Line port for telephone line

We specialize in Network Infrastructure Design, Installation and Support, including Voice and Data Systems, Fiber Optic Networks, Network Equipment Installation, Distributed Antenna Systems (DAS), and Wireless Systems in Commercial facilities. We deliver quality solutions on time and on budget. From maintenance and service requests in existing buildings, to new Network Infrastructure in a new construction, HBY has your solution.

A fiber-optic cable, also known as an optical-fiber cable, is an assembly similar to an electrical cable but containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable is used. Different types of cable are used for optical communication in different applications, for example long-distance telecommunication or providing a high-speed data connection between different parts of a building.

MPO is the abbreviation of "Multiple-Fiber Push-On/Pull-off", which is a high-density and high-performance solution that can replace 12 or 24 LC connectors with only one MPO/MTP connector. They feature faster speed, easier installation, lower cost, pre-termination and higher density with less space compared with traditional fiber products. That is why they are widely applied in data center. HBY can supply cost-effective and customized MPO/MTP solution.

Fiber Optic Assemblies including Fiber Optic Patch Cords，Fiber Optic Pigtail，Fiber Optic PLC Splitter，Fiber Optic FBT Coupler，Hybrid PLC Splitter.

Cable management refers to management of electrical or optical cable in a cabinet or an installation. The term is used for products, workmanship or planning. Cables can easily become tangled, making them difficult to work with, sometimes resulting in devices accidentally becoming unplugged as one attempts to move a cable. Such cases are known as "cable spaghetti", and any kind of problem diagnosis and future updates to such enclosures could be very difficult. Cable management both supports and contains cables during installation, and makes subsequent maintenance or changes to the cable system easier. Products such as cable trays, cable ladders, and cable baskets are used to support a cable through cabling routes. Cable Management including FTTH Terminal Box，Fiber Optic Distribution Box，Fiber Optic Patch Panel，Fiber Optic Splice Closure

Fiber-to-the-antenna (FTTA) is a wireless site architecture where optical fiber is run all the way up the tower to replace much of what was traditionally completed with heavier coax cabling. Important components such as remote radio units (RRUs) are also positioned at the top of the tower instead of at the base location. In a FTTA configuration case, a baseband unit (BBU) situated near the bottom of the tower is connected via a fiber optic antenna and runs to a remote radio head (RRH) positioned near the antennas at the top of the tower. The RRH converts the digital signals to analog, and the short span between RRH and antenna is still completed using traditional coax cabling.

FTTH (Fiber To The Home) means that a fiber optic cable is directly connected to households. Specifically, FTTH refers to the installation of optical network units (ONUs) in residential or corporate users homes, and it is the closest type of optical access network application to users apart from FTTD (Fiber To The Desktop). The significant technological feature of FTTH is not only providing larger bandwidth but also enhancing the transparency of data formats, rates, wavelengths and protocols on networks. It relaxes requirements for environmental conditions and power supply while simplifying maintenance and installation processes.

A WDM system uses a multiplexer at the transmitter to join the several signals together and a demultiplexer at the receiver to split them apart. With the right type of fiber, it is possible to have a device that does both simultaneously and can function as an optical add-drop multiplexer. The optical filtering devices used have conventionally been etalons (stable solid-state single-frequency Fabry–Pérot interferometers in the form of thin-film-coated optical glass). As there are three different WDM types, whereof one is called "WDM", the notation "xWDM" is normally used when discussing the technology as such

An optical transceiver, sometimes called a fiber optic transceiver, is an interconnect component that can transmit and receive data. It consists of two main parts: a transmitter and receiver. This critical component uses fiber optic technology to convert electrical signals to light signals and vice versa. Optical transceivers are used in most industries, and they are of utmost importance in telecom applications due to their ability to transport high levels of data over a network. This versatile component can either be plugged into or embedded into a network device. They come in a variety of shapes and sizes. Different types of optical transceivers are defined by form factors.

ONU is essentially a device used in optical fiber network systems such as GEPON and GPON. It is typically used to communicate with devices such as the users computer. It can transmit data from the user device to the fiber optic network or from the fiber optic network to the user device. ONU usually contains an interface for connecting to user equipment such as computers, and an interface for connecting to optical fiber networks.